Packable sunscreen with wire system
Retractable sunshade awning with “Z” shaped blade with side border which, added to the central rib, give greater strength. Texband passage blade holes riveted. Tent traction ensured by 8 mm Texband tapes with 100,000 certified handling cycles. Orientation movement regulated by terylene tapes composed of Aramid and Kevlar anchored to the slats by means of stainless steel hooks that can be opened to allow for any replacement on site.
At the ends of the blades, positioned alternately, the zamak pegs are fixed which slide inside the lateral guides resting on the relative gaskets to avoid noise. In the upper part, the steel operating channel, facing downwards, allows for inspection, collects the components that allow the transmission of movement, whether by hoist or motor. Inside are housed the variators necessary for winding the Texband and the orientation of the blades using terylene in turn connected with stainless steel clips (called mammoth). The transmission component is a Ø14mm splined extruded aluminum shaft that passes through the variators.
Direct or 45° or 90° winch operation, jointed handle with Ø15mm aluminum rod.
Movement with mechanical motor: the motor power is calculated based on the size of the awning. The motor features a Hirschmann Stas 3 (called male) waterproof plug mating to the Stak 3 (called female) receptacle.
90 STD at a glance
|attractive design, achievable up to 12.5 m2
|in rimmed aluminum alloy, dim. 92 mm, with “Z” shape equipped with anti-noise rubber – thickness 0.47 mm
|size 20×21, in extruded aluminium, equipped with anti-noise rubber
|Beaufort scale wind resistance
|class 6 – Nominal pressure 400 Pa equivalent to about 92 km/h